Product Index - Ladd Research

23605 - Lead Citrate - 100 g

Most common lead stain. Does not readily form carbonates which commonly occur when using other lead stains. 100g.

$129.95

23612 - Phosphomolybdic Acid - 25 g

Metal stain. 25 g.

$34.95

23610 - Phosphotungstic Acid, ACS Grade - 25 g

Electron dense stain. Binds to specific sites in proteins. It also serves as a universal stain for proteinaceous material. Particularly effective in staining coagulin and cytoplasmic fibrillar structures. 25g.

$58.95

80010 - Silica Gel - 1 lb

6 to 16 mesh. 1 lb. container.

For use in Ladd Desiccator (SKU: 80040)

$51.95

55170 - Potassium Dichromate - 250 g

Metal stain. 250 g.

$51.95

55180 - Potassium Permanganate - 500g

Metal stain and EM fixative. 500 g.

$124.95

70906 - Acid Fuchsin - 10g

A magenta red acid dye used widely as a plasma stain. Also has many uses in plant and animal histology and cytology. 10 g.

$24.95

23615 - Ruthenium Red, Certified - 1 g

Inorganic stain useful in both light and electron microscopy. Very helpful in studies of pectin, animal tissues and bacteria. 1 g.

$129.95

55110 - Silver Nitrate - 25 g

Metal stain. 25 g.

$104.95

Uranyl Acetate

Available in 25g, 50g, 100g, 500g and 1000g sizes. An easily used general purpose electron stain. It increases general contrast of microtome sections. May be used quite successfully in staining of acrylic and epoxy sections.

Starting at: $335.00

Nitrocellulose (Collodion) Solution

Available in 30 ml bottles. Solutions are available upon request in any other concentration up to 10% other than 1, 2, 3, 4, 5, 6, 7, 8, 9 or 10%.

Starting at: $27.95

10830 - Ethylene Dichloride - 120 ml

1,2-Dichloroethane. ACS Grade. 120 ml

$39.95

Met-a-Terge

Available in quart and gallon sizes. A high flash point detergent compound which dissolves or suspends uncured epoxy, urethanes and silicones.

Starting at: $44.95

13050 - Plastisolve - 8 oz

An effective solvent for loosening and suspending polymerized epoxy resin. 8 oz

$42.95

Isopropanol

Available in 500ml and 1 liter sizes. General usage laboratory solvent. ACS Grade.

Starting at: $29.95

21399 - Butyl Acetate - 450 ml

General purpose. Can be used as thinner for Conductive Silver Paint. 450 ml.

$29.95

Formvar (Polyvinyl Formal) Solution

0.25% - For making very thin substrates for electron microcopy.

0.5% - Used for making normal substrates.

3% - For making thick plastic replicas of surfaces where a certain amount of elasticity is necessary for stripping.

Any desired concentration up to 10% other than 0.25, 0.5, 1, 2 and 3% are available upon request. Please specify concentration.

Starting at: $23.95

Solvon® PB

A powerful solvent for cleaning and degreasing. A good replacement for 1,1,1-Trichloroethane and trichloroethylene. It meets or exceeds the requirements of ASTM-D-6368. Available in quart, gallon and 5 gallon sizes.

Starting at: $74.95

Super Shield 841 Nickel Conductive Coating

A general purpose EMI and RFI shielding coating.

PLEASE NOTE!! This coating is being replaced by the new and improved AR series of acrylic conductive coatings! We have only a limited supply of the aerosol listed below. For all other forms and quantities see 841AR.

Starting at: Call For Price

Thinner 435

Thinner / Solvent for Total Ground 838, Super Shield 839, Super Shield 841, Super Shield 842 and Super Shield 843.

Starting at: $22.95

Thinner 4351

Thinner / Solvent for Total Ground 838, Super Shield 839, Super Shield 841, Super Shield 842 and Super Shield 843.

Starting at: $22.95

LCP-101 - Microfil CP-101 Corrosion Casting Compound - 1 pound

Discontinued

Corrosion casting compound for large ( >100 microns ) vessels.

Call For Price

Butvar Powder and Solutions

Butvar B-98 polyvinyl butyral resin and solutions.

Starting at: $15.95

Nitrocellulose Strips

A very high quality generic substitute for the discontinued Parlodion. Useful for making collodion solutions.

Starting at: Call For Price

Epo-Tek 301 Epoxy Resin

Epo-Tek 301 is a non-conductive, two-component, room temperature curing, medical grade epoxy featuring very low viscosity and excellent optical and mechanical properties.

Starting at: $209.95

Epo-Tek 301-2 Epoxy Resin

EPO-TEK 301-2 is a two-component, non-conductive epoxy resin with low viscosity, long pot-life and good handling characteristics. It is used for optical, medical and semiconductor applications. For a more flexible version of this product please see L301-2FL .

Starting at: $194.95

Conductive Powders

Conductive powders for the preparation of your own conductive epoxy, adhesive, embedding resin or acrylic resin.

Starting at: $15.00

Conductive Paste and Grease

Conductive greases and paste to improve electrical and thermal connections between sliding or non-moving surfaces.

See below for a more detailed description of each product.

Starting at: $21.95

Nitrocellulose with Alcohol

Nitrocellulose with alcohol for use in making collodion solution or lacquers. Quantity supplied is either 50 or 100g by weight of nitrocellulose. Since the solid content of this product varies around 65% the actual mass of the product will be higher to compensate for the presence of approximately 35% alcohol.