
Vacuum Equipment Including Sputtering Targets & Desiccator Cabinets
Ladd Research sells a wide variety of vacuum equipment. Products include sputtering targets, vacuum evaporators & desiccators, glisseal vacuum grease, desiccator cabinets & sputter coaters.
30401 - Non-Ladd Electrical Leads for Carbon Rod Evaporation Unit - Tungsten Basket Holder - Boat Holder
30400 - Ladd Electrical Leads for Carbon Rod Evaporation Unit - Tungsten Basket Holder - Boat Holder
30170 - Carbon Rod Evaporation Unit
30675 - Wire Cutting Pliers (Heavy Duty)
Ladd 30999 Carbon Evaporation System
Features
- Single cabinet with all assemblies within the cabinetry
- Carbon evaporation with pre-sharpened rods for repeatable operating parameters, less labor to prepare
- Uses 1/4" carbon rods
- Safety interlock for vacuum and high voltage
- Automatic vent at machine off selection
- Complete package ready for coating, includes rods, pump and oil and manual
- Integral dual stage direct drive rotary vane 1 cfm vacuum pump
- Manually controlled operation
- 100 Volt, 10 Ampere power supply
- Stage diameter accommodates up to 12 SEM pin stubs
- Stage diameter accommodates up to 75 mm diameter substrates
- Chamber is annealed, ends are grounded, polished and re-annealed
- System is 535 mm x 330 mm x 320 mm
- Digital display of vacuum
- Analog display of current
Starting at: Call For Price
30125 - Goggles
Liquid Nitrogen Thermos
Starting at: $62.95
30000KIT - Manifold Valve Assembly Rebuild Kit for LADD Vacuum Evaporator
Classic Floor Model LADD Vacuum Evaporator
We have decided to discontinue the manufacture of all Ladd Vacuum Evaporators. However, we will continue to sell most parts and accessories for them. Please call us at (802) 658-4961 if you require a part or if you have any questions.
Applications Include:
- Preparation of uniform high purity ultra thin carbon support films
- Carbon replication
- Aperture and microhole cleaning
- SEM sample coating
- TEM grid support films
- Noble metal deposition
- Chromium coating
- Silicon monoxide coating
Starting at: Call For Price
Floor Model LADD Vacuum Evaporator with Turbo Pump
We have decided to discontinue the manufacture of all Ladd Vacuum Evaporators. However, we will continue to sell most parts and accessories for them. Please call us at (802) 658-4961 if you require a part or if you have any questions.
Applications Include:
- Preparation of uniform high purity ultra thin carbon support films
- Carbon replication
- Aperture and microhole cleaning
- SEM sample coating
- TEM grid support films
- Noble metal deposition
- Chromium coating
- Silicon monoxide coating
Key advantages of a turbo pump over a diffusion pump:
1. Quicker pump down. From a cold start to high vacuum in less than 3 minutes.
2. Cleaner system - No oil vapors.
3. Better, faster vacuum.
4. Air cooled. Water is not required for cooling a turbo pump.
Starting at: Call For Price
Bench Top LADD Vacuum Evaporator with Turbo Pump
We have decided to discontinue the manufacture of all Ladd Vacuum Evaporators. However, we will continue to sell most parts and accessories for them. Please call us at (802) 658-4961 if you require a part or if you have any questions.
Key advantages of a turbo pump over a diffusion pump:
1. Quicker pump down. From a cold start to high vacuum
in less than 3 minutes.
2. Cleaner system - No oil vapors.
3. Better, faster vacuum.
4. Air cooled. Water is not required for cooling a turbo pump.
Starting at: Call For Price
Glass Bell Jar
Starting at: Call For Price
30106 - Bell Jar Repair Epoxy
30099 - Bell Shine
Buna-N (nitrile) Bell Jar Gaskets
Starting at: $99.95
Viton Bell Jar Gaskets
Starting at: Call For Price
30110 - Bell Jar Protective Cover
30120 - Bell Jar Support
Well-made wooden form with support arms lined with foam rubber to protect bell jar from damage. Securely holds any 12" diameter bell jar for cleaning or while setting up an experiment in the evaporator.
NOTE: Not for 18" diameter bell jars.
Tungsten / Alumina Crucibles
The alumina ceramic coated tungsten evaporation basket is an internally heated crucible that is designed to provide the means for vacuum evaporation of a number of various metals, and at the same time provide a more useful crucible life with these type metals.
Providing strongly upward evaporation in the deposition profile, these tungsten/alumina crucibles maintain molten metal evaporants as an induction propelled spinning ball inside the cavity. Most materials can be completely evaporated without loss to the chamber. Recommended evaporant materials are nickel, iron, or their alloys, as well as a broad range of other metals, such as gold, tin, indium and silver. Other materials which can be evaporated include antimony, bismuth, cadmium, cobalt, copper, lead, manganese, palladium, zinc and alloys such as nichrome and permalloy.
Please view the table at the bottom of this page for technical specifications for each tungsten / alumina crucible.
Starting at: $50.95
Tungsten Basket Evaporation Shields
A shield greatly reduces deposits of evaporated metals on the electrodes and bell jar, yet allows clear observation of the amount on the specimen. Special features of each unit are:
- Two side arms which fit filament posts, each supporting a chrome-plated disc.
- An annealed Pyrex tube which slides over the discs and is held securely in place by a coiled spring.
- A precisely sized slot in the tube, which aligns accurately with a hole in the metal shield held in place beneath the slot, allowing controlled passage of evaporated metal to specimens.
- Pyrex tube and metal shield can be rotated, permitting coating or shadowing from any angle.
- Pyrex tubing will not crack from heat generated during evaporation.
Complete instructions included with each unit.
The Replacement Tube is Annealed Pyrex. Extra tubes are helpful, since one can be in use while others are being cleaned. All edges are fire polished.
Starting at: $107.95
Secador 3.0 Auto-Desiccator Cabinet
The superior dehumidification performance of the auto-desiccator model makes it a natural choice for more perishable and expensive chemicals that require constant low humidity. Totally automatic, continual desiccation with silica beads, and regeneration every 20 minutes, keeps the RH in the desiccator at a constant low level. No long regeneration lag between cycles - minimal RH change from opening the door. Two fans guarantee continuous air flow either within the cabinet, or continuous exhaust of humid air.
Starting at: $1,100.95
Secador 3.0 Desiccator Cabinet
Non electric
Built-in hygrometer, 3 shelves 3 shelf positions, internal volume: 1.58 cu. ft.
2 latches. Provision for lock or tamper evident seal
Door opening: 12.25"H x 8.9"W
Overall dimensions: 16.4"H x 13.4"W x 16.3"D
Starting at: $1,065.95
Secador 4.0 Auto-Desiccator Cabinet - Vertical
The superior dehumidification of the Auto-Desiccator model makes it a natural choice for more perishable and expensive chemicalos that require constant low humidity. Totally automatic, continual desiccation with silica beads, and regeneration every 20 minutes, keeps the RH level in the Secador ® 4.0 Desiccator at a constant level. No long regeneration lag between cycles - minimal change from opening the door. Two fans quarantee continuous air flow either within the cabinet, or continuous exhaust of humid air.
Starting at: $1,369.95
Secador 4.0 Desiccator Cabinet - Vertical
May be stacked two high.
Use with any desiccant.
Starting at: $995.95
Secador 4.0 Auto-Desiccator Cabinet - Horizontal
Patented Dehumidifying Module - Automatic Desiccant Regeneration
Superior Humidity Reduction - safe storage
Patented sealed construction - airtight, dust and moisture-free storage
Built-in hygrometer, Auto-Desiccator Module
2 shelves, 2 positions, 2 latches
Provision for lock or tamper evident seal
Reduces RH from 75% to <25% in approximately 8 hours
Maintains RH level within narrow range, Internal Volume: 2 cu. ft.
Door opening: 8.9" H x 16.4" W
Overall dimensions: 13.4" H x 20.4" W x 16.3" D
Starting at: Call For Price
Secador 4.0 Desiccator Cabinet - Horizontal
Use with any desiccant
Non Electric
Built-in hygrometer, 2 shelves, 2 shelf positions
Internal volum e: 2 cu. ft.
2 latches. Provision for lock or tamper evident seal
Door opening: 8.9" H x 16.4" W
Overall dimensions: 13.4" H x 20.4" W x 16.3" D
Starting at: $995.95
31025 - Desi-Can Reusable Desiccant Canister
31050 - Storage Turntable for Desiccators & Cabinets
Smooth action bearings facilitate easy turning Perfect for use in desiccators and cabinets as well as on a table or shelf . Works best in Secador 1.0 and above.
Dimensions: 23 x 1.5cm (9.0 x 0.6")
Disposable Desiccant Mini-Cartridges
Use for many different applications: Desiccator cabinets, non-vacuum desiccators, analytical balance cases and precision laboratory instruments. Porous membrane permits rapid moisture absorption. Dish is clear polystyrene. Color change is readily visible. Traditional blue to pink color change. Easily regenerated. Individually sealed in foil package.
Sold in boxes of 6.
Starting at: $69.95





