Vacuum Equipment

Vacuum Equipment Including Sputtering Targets & Desiccator Cabinets

Ladd Research sells a wide variety of vacuum equipment. Products include sputtering targets, vacuum evaporators & desiccators, glisseal vacuum grease, desiccator cabinets & sputter coaters.

Items 121 to 144 of 144 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
per page

Grid List

Set Descending Direction
80000 - Standard Desiccator

80000 - Standard Desiccator

Stainless steel with special heavy aluminum lid. Used for drying and storing all types of photographic film, plates, loaded cameras and cassettes.

Comes complete with:

  • Silica gel tube
  • Toggle switch to
    release pressure
  • Porcelain tray

10.5" high x 9" diameter.

$840.00
/

80040 - Large Desiccator

Stainless steel with special heavy aluminum lid. Used for drying and storing all types of photographic film, plates, loaded cameras and cassettes.

Comes complete with:

  • Silica gel tube
  • Toggle switch to release pressure
  • Porcelain tray

15" high x 15" diameter. Accommodates 2 complete cameras or 4 cassettes for Philips EM-400.

$1,225.00
/

80006 - Silica Gel Tube

Disposable plastic tube for newer Desiccators.
$17.50
/

80015 - Porcelain Tray

Replacement tray for Standard Desiccator (sku: 80000).
$179.95
/

80041 - Vacuum Gauge

With 2" dial. For Large Desiccator (sku: 80040).
$64.95
Secador 2.0 Desiccator Cabinet

Secador 2.0 Desiccator Cabinet

Non electric
Built-in hygrometer, 2 shelves 2 shelf positions, internal    volume: 1.17 cu. ft.
2 latches. Provision for lock or tamper evident seal
Door opening: 8.25"H x 8.9"W
Overall dimensions: 12.4"H x 13.4"W x 16.3"D

Starting at: $559.95

Secador 2.0 Auto-Desiccator Cabinet

Secador 2.0 Auto-Desiccator Cabinet

The superior dehumidification performance of the auto-desiccator model makes it a natural choice for more perishable and expensive chemicals that require constant low humidity. Totally automatic, continual desiccation with silica beads, and regeneration every 20 minutes, keeps the RH in the desiccator at a constant low level. No long regeneration lag between cycles - minimal RH change from opening the door. Two fans guarantee continuous air flow either within the cabinet, or continuous exhaust of humid air.

Starting at: $910.95

Secador 1.0 Desiccator Carrying Case

Secador 1.0 Desiccator Carrying Case

  • Carrying Handle
  • Built-in Hygrometer
  • Two latches - Provision for lock or tamper evident seal.
  • Internal Volume: 0.75 cu. ft.
  • Overall Dimensions: 14.7" H x 8.4" W x 16.3" D
  • 2 removable shelves

Starting at: $317.95

Boat Holder

30700 - Boat Holder

Holds metal boats securely while firing molybdenum apertures under vacuum for cleaning. Also used to hold boats containing powdery material being evaporated in vacuum. Consists of two sturdy insulated supports mounted firmly in heavy nickel-plated base. Boats left in this holder will last through many firings. Comes with package of Tungsten Boats
$549.95
30710 Tungsten Boat

Tungsten Boats

Made from top quality, 1 mil thick foil. Used to hold molybdenum apertures during firing in vacuum for cleaning. Overall Length, Flat bottom Length, Width, Depth Other metal boats available on request.

Starting at: $18.95

Molybdenum Boats

Molybdenum Boats

Used to hold powdery material during evaporation. Overall Length, Flat bottom Length, Width, Depth Other metal boats available on request.

Starting at: $50.95

/

30745 - Platinum Boat

Overall length 1 7/8" including electrode tabs. Flat bottom of boat is 7/16" long x 3/16" wide x 3/32" deep. Other metal boats available on request.
$71.95
Carbon Rod Sharpener

Carbon Rod Sharpener

Precision cutting of carbon rods by these sharpeners eliminates all difficulties of producing excellent carbon rod points for evaporation. Details to carbon rod diameter and VAC included below.

Starting at: $1,099.95

Accessory to Convert 0.120", 115 VAC Carbon Rod Sharpener to a 1/4" Rod Cutter - 30289

Accessory to Convert 0.120", 115 VAC Carbon Rod Sharpener to a 1/4" Rod Cutter - 30289

Converts 0.120" diameter rod sharpener to 1/4" rod sharpener
$294.95
30290 - Pointing Fixture for 0.120" Carbon Rods

30290 - Pointing Fixture for 0.120" Carbon Rods

For use with Carbon Rod Sharpener to point carbon rod preliminary to cutting 0.040" diameter point.
$179.95
30291 - Kit to Convert 1/4", 115 VAC Carbon Rod Sharpener to 1/8" Rods

30291 - Kit to Convert 1/4", 115 VAC Carbon Rod Sharpener to 1/8" Rods

Kit to Convert 1/4", 115 VAC Carbon Rod Sharpener to 1/8" Rods
$294.95
30295 - Cutting Tool for 0.120" Carbon Rod Sharpener

30295 - Cutting Tool for 0.120" Carbon Rod Sharpener

For cutting required length of 0.040" carbon rod points. Complete with 3-sided carboloy blade.
$179.95
30296 - Cutting Tool for 1/4" Carbon Rod Sharpener

30296 - Cutting Tool for 1/4" Carbon Rod Sharpener

For cutting required length of 0.040" carbon rod points. Complete with 3-sided carboloy blade.
$169.00
30300 - Carboloy Blade for Cutting Tool

30300 - Carboloy Blade for Cutting Tool

Three cutting edges. Sold individually.
$39.95
30305 - Carbon Rod Drilling Fixture

30305 - Carbon Rod Drilling Fixture

For use with Carbon Rod Sharpener to drill 3/64" deep holes in the ends of carbon rod segments to hold one end of a platinum-carbon pellet during evaporation.
$189.95
31045 - Secador Mini Desiccator Cabinet

31045 - Secador Mini Desiccator Cabinet

A single positive latch on the door furnishes a secure seal. The door-mounted dial hygrometer provides a convenient way to measure relative humidity. Drying can be accomplished with single-use or reusable desiccant (Scienceware® Catalog #'s: F42048-0065 or F42048-0100, F42046-0000, F42045-0200). An optional under shelf mounting kit is available to conserve desktop area.

$279.95
31046 - Secador Mini Desiccator Cabinet with Gas Ports

31046 - Secador Mini Desiccator Cabinet with Gas Ports

The door-mounted dial hygrometer permits convenient tracking of RH. The door features a latch that offers outstanding sealing. Unit includes fittings, stopcock (for 1/4" ID tubing) and instructions for simple assembly.

$340.00
Secador 1.0 Desiccator Cabinet

Secador 1.0 Desiccator Cabinet

  • Can be stacked three high.
  • Use with any desiccant.
  • Built-in Hygrometer.
  • Patented sealed construction.
  • One latch - Provision for lock or tamper evident seal.
  • Internal Volume: 0.75 cu. ft.
  • Door Opening: 4.4" H x 8.9" W
  • Overall Dimensions: 8.4" H x 13.4" W x 16.3" D
  • Movable platform - desiccant cartridges can be added under the platform.

Starting at: Call For Price

80055 - Replacement Seal for Large Desiccator

80055 - Replacement Seal for Large Desiccator

Replacement lid seal for Large Desiccator (sku: 80040)
$21.95

Items 121 to 144 of 144 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
per page

Grid List

Set Descending Direction

Electron Microscopy Supplies