Lab Chemicals Including Solvents, Fixatives & Mounting Media
Purchase a wide variety of lab chemicals for applications in microscopy and other fields from Ladd Research. Products include solvents, fixatives, mounting media, stains for light microscopy, buffer chemicals, electron stains, embedding kits & more.
Loctite EDAG 154 (known as Electrodag 154 & Colloidal Graphite Paint)
Electrodag 154 is an easy-to-apply resistance coating designed to provide high lubricity, conductivity, and excellent release properties to many nonconductive substrates, including most plastics.
New Name: Loctite EDAG 154 E&C
Isopropanol solvent.
Starting at: $59.95
Glutaraldehyde - 10% Aqueous - EM Grade
Starting at: $35.95
LR White - Hard and Medium Grade Resins - 500 g
Starting at: $249.95
Glutaraldehyde - 25% Aqueous - EM Grade
Starting at: $42.95
60803 - Conductive Silver Pen
This pen is great for adhering samples to SEM stubs. Designed for making instant conductive silver traces, the specially formulated silver-bearing thermoplastic polymer dries in minutes at room temperature. Valved pen tip allows smooth flow with normal writing pressure and is spring loaded to prevent clogging. Pen tip is approximately 1/16" in diameter. If you wish to use the pen for traces, solderable terminations are possible using a 250o F cure for 10-15 minutes. Tin, lead, or silver solder can be used (do not exceed 350 o F for more than 5 seconds.) Each pen is filled with approximately 100 feet worth of traces. Approximately 39-45% silver with less than 10 microns in diameter. Thinner is butyl acetate.
Product Weight: 8.5 g.
Conductive Silver Epoxy Kit
Use this two part electrically conductive silver epoxy for adhering microscope samples and solderless connections. Also good for bonding in electric design, prototype and repair projects. Applications include circuit board repair, surface mount connections, static discharge, shielding and grounding. Ideal for bonding of heat sensitive components. Curing time as little as ten minutes when 150-250o F is applied. Resistivity is 0.001 ohm-cm. 14 gram kit (7g each resin and hardener).
Starting at: $139.95
NMA - Nadic Methyl Anhydride (Methyl Norbornene Dicarboxylic Anhydride)
Starting at: $42.95
DDSA - Dodecenyl Succinic Anhydride
Starting at: $42.95
Bonderite L-GP 154 Acheson (known as DAG 154)
Dag 154 provides clean,long-wearing lubrication without redesign of component dimensions. Coatings are easily applied during manufacture or assembly by standard spray, brush or dip techniques.
New Name: Bonderite L-GP 154 Acheson
Isopropanol solvent.
Starting at: $116.95
Bonderite S-FN EB 012 Acheson (known as DAG EB-012)
DAG EB-012 (also known as Electrodag EB-012) is one in a series of graphite-based conductive coatings designed to provide controlled electrical properties. It is designed to provide a conductive, chemical-resistant coating on most metals. It is an aqueous-based, conductive, chemical-resistant coating for lithium batteries.
New Name: Bonderite S-FN EB 012 Acheson
Starting at: $59.95
Bonderite S-FN M 254N Acheson (known as Molydag 254N)
One of a series of resin-bonded lubricant coatings designed to provide dry film lubrication in a variety of industrial, consumer and military applications. Molydag 254N is a synergistic conbination of MoS2 and other lubricants dispersed in an epoxy resin solution. It can be applied by standard brush, dip-spin or spray techniques. Molydag 254N provides lifetime lubrication and good corrosion resistance for components which are inaccessible after assembly, but nevertheless must continue to function reliably. Molydag 254N provides an effective performance, even as a very thin film (0.0003" or 8 microns), thus there is little interference with operating tolerances.
New Name: Bonderite S-FN M 254N Acheson
Starting at: Call For Price
Bonderite S-FN 213 Acheson (known as DAG 213)
One of a series of resin bonded graphite coatings designed to provide dry film lubrication on many substrates.
New Name: Bonderite S-FN 213 Acheson
Starting at: Call For Price
Electrodag 1415M
A silver-based shielding coating which provides electromagnetic compatibility (EMC) and has been specifically designed to give increased coverage while maintaining a very high conductivity. It is a very economic means of achieving excellent shielding against radiated electromagnetic interference (EMI). It maintains its low resistance even after exposure to heat, cold, humidity and salt spray. It is an air drying system that requires no primer or top coat. It is easily applied by spray or brush and is compatible with plastics commonly used for electronic equipment enclosures. Each can contains 1500 grams (approximately 1 quart).
Minimum order - 3 cans
Electrodag 1415M is designed to replace all discontinued shielding coatings that had contained silver-plated copper.
Starting at: Call For Price
Epo-Tek 383ND
A slightly longer pot life version of L353ND. Designed for high temperature, optical and structural applications inside the semiconductor, hybrid, electronic, fiber optic and medical industries.
Please Note:
This product is NOT conductive.
Starting at: $134.95
L353ND - Epo-Tek 353ND
LEJ2189-LV - Epo-Tek EJ2189-LV
LEE129-4 - Epo-Tek EE129-4
No Longer Available
For substitute please see Product Number LEJ2312-1
LH20E - Epo-Tek H20E
Bonderite S-FN T-502 Acheson (known as DAG T-502 & Conducting Graphite Paint)
DAG T-502 is a combination of specially processed carbon particles in a fluoroelastomer resin system designed to provide high resistance values. Solvent is methyl ethyl ketone. Also known as Conducting Graphite Paint. Formerly known as Electrodag 502.
New Name: Bonderite S-FN T-502 Acheson
Starting at: Call For Price
Bonderite L-GP G Acheson (known as Aerodag G)
Graphite lubricating resistance coating. Aerodag® G offers excellent adhesion to most plastics. This feature, combined with high lubricity and electrical properties, makes this product especially valuable in the design of lightweight electrical/electronic parts.
NEW NAME: Bonderite L-GP G Acheson
10.5 oz. aerosol
Starting at: $48.95
GMA (Glycol methacrylate)
Alternative dehydrant to use where organic solvents cannot be used. The latter leach out certain cell components, e.g. lipids. Ultraviolet polymerization at low temperatures or thermal polymerization may be used. Dehydrate and embed with the same compound.
This product is available in 250ml and 450ml sizes.
Starting at: $30.95
Glutaraldehyde - 50% Aqueous - EM Grade
Starting at: $33.95
21325 - Aquembed Resin - 100 g
21321 - ERL 4221 - 225ml
- Category
-
- Epo-Tek Conductive Silver Epoxies (16)
- Lubricants, Conductive Coatings, and Paints (19)
- SEM Conducting Paints (7)
- Embedding Media (33)
- Fixatives (26)
- Buffer Chemicals (7)
- Dehydrating Agents (6)
- Electron Stains (13)
- Embedding Kits (17)
- Stains for Light Microscopy (11)
- Mounting Media (0)
- Chemicals for Substrates (6)
- Solvents (8)
