Laboratory Supplies - Disposables, Storage, Safety Aids & More

Box dimensions: 40mm x 40mm x 18mm. Membrane dimensions: 28mm x 28mm. Package of 3 or 12.

Available in many dimensions and package sizes. Molded of transparent styrene with hinged covers. Excellent for storage of small parts, tools, instruments, etc.

Low Profile Fortress™ FIB Holder to hold either a standard FIB lift out specimen on a grid or an H-Bar diced-cut sample.

P-80® THIX Temporary Assembly Lubricant gel eases installation of tight-fitting rubber and plastic parts by reducing the force needed for assembly. Once assembly is complete, the lubricant dries and the part returns to its original condition. P-80 THIX is especially useful in overhead and vertical assembly operations because it remains where it is applied without dripping. P-80 THIX thins out under pressure so it can be used in automated systems or applied manually by dip, brush, or spray techniques. P-80 THIX Temporary Assembly Lubricant is used to install hoses, o-rings, seals, bushings, gaskets, grommets, grips, and many other rubber and plastic parts. Use P-80 THIX when a thick coating of lubricant is needed, when it is important that the lubricant stay where it is applied, and/or when a prolonged drying time is desired. Typical viscosity: 7,500 cps at 25° C

No Longer Available.

Please see Catalog Number 30277 for the replacement product. 

Designed to hold the Tripod Polisher upside down to allow for viewing the specimen under a dissecting microscope. The stand can also be used as a storage device in between processing steps.

These gloves protect hands and lower arms against extremely cold atmospheres. Suitable for temperatures as low as -196°C but NOT FOR IMMERSION IN LIQUID NITROGEN. Provide warmth and flexibility without bulkiness. Waterproof, hypo-allergenic insulation contains no asbestos. Machine washable and dryable, lining can be pulled out for quick drying. 14" long, cuff reaches mid-forearm.

Effective, safe and fast method to contain hazardous liquid spills involving acids (except hydrofluoric acid), caustics, solvents or oils. Pillows are filled with an amorphous silicate absorbent enclosed in a chemical resistant, porous polyolefin pillow - eliminates need for loose, messy absorbents. Superior absorbing properties - pillows absorb their capacity within seconds after making contact with the spill. Once liquid spill is contained, simply dispose of pillow according to appropriate safety guidelines. Comes in 250 ml, 1 L, and 4 L absorbing capacities

Center It is a tool for drilling pipe and other round objects. Center It is made specifically for use in a drill press. The 7/16" groove with a 118 degree angle lets you bottom drill bit to center v-block. The 5 " long, 4" wide V-block bolts to the drill press table and enables the drilling of round pieces parallel and centered. This allows you to drill any size of pipe and wood dowels. The grooves on the outer sides eliminate slippage while holding pipes, etc., for sawing on job sites or other applications. To use, simply place Center It on the drill press table, run the bit down (with motor off) to hold the jig centered on the bit, then bolt the jig to press table. No clamping of the tube is necessary since the angled flats of the jig hold it centered. Holes will automatically be centered on the tube with no center-punching necessary. If tubing is too large to drill in a single operation it can simply be turned over.

Dark green #5 lens protects the eyes while observing evaporation of metals and carbon. Fit over most prescription glasses. No-fog vents. Adjustable headband. NOW with free #10 lens.