Standards and Specimen Preparation Supplies

Standards & Specimen Preparation Supplies, TEM & SEM Calibration

For TEM & SEM Tests & Calibration. Products include Embedding Capsules, Dri-Block oven, Collodion Solutions, Formvar Powders & Solutions, Release Agents/Dry Lubricants, Replicating Material, Mica Sheets, Grinders, Polishers, & Wire Saws, Zerostat Anti-static Instrument, Microanalytical Tools, Microtomy Supplies, Silicone Rubber Embedding Molds, & Magnification Reference Standards.

Items 31 to 60 of 154 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
per page

Grid List

Set Descending Direction
12015 - Replicating Tape - 15' x 1.5" x 5 mil

12015 - Replicating Tape - 15' x 1.5" x 5 mil

Replicating Tape, 15' x 1.5" x 5 mil Roll
$44.95
12020 - Replicating Tape - 50" x 1.5" x 3 mil

12020 - Replicating Tape - 50" x 1.5" x 3 mil

Replicating Tape, 50" x 1.5" x 3 mil Roll
$14.95
12017 - Replicating Tape Combo Kit

12017 - Replicating Tape Combo Kit

Includes 1 roll each of Replicating Tape with the dimensions 15' x 0.75" x 5 mil, 15' x 01.5" x 5 mil and 50" x 1.5" x 3 mil.
$60.95
32176 - Cellulose Acetate

32176 - Cellulose Acetate

Cellulose Acetate for Large Surfaces 0.005" thick, 4" x 4", 12 sheets/pkg
$32.95
12025 - Polystyrene Pellets

12025 - Polystyrene Pellets

Cellulose Acetate for Large Surfaces For dry replication, 1 oz
$13.95
Printed Viewing Frames

71050 - Printed Viewing Frames

Viewing frames for holding replicas flat during study or projection. 100 per package
$50.95
Victawet

53155 - Victawet 35B

White, waxy, water soluble material used as a parting layer to permit floating a replica free from a specimen surface. Predried to minimize delay during operational pump-down in the vacuum evaporator. 5 grams
$23.95
Mica Sheet - 2" x 3" x 0.005"

Mica Sheets

Mica is used in the preparation of carbon substrates. Evaporated carbon film can readily be floated free from a freshly cleaved mica surface and then be picked up on grids. Sheets are easily cleaved to form 3 or 4 fresh surfaces. Flame spectroscopy analysis show this mica to be of very high quality. Packages of 12 sheets

Starting at: $29.95

FMC - Circular Mica Sheets

FMC - Circular Mica Sheets

V-1 grade muscovite mica. Colorless, optically transparent, perfect (mirror quality) surfaces. 25 mm diameter and 9-11 microns thick. Minimum quantity - 10 pieces. For more information on an application of this product please see the attachment below. Please inquire for discounts on larger quantities.
$23.95
Zero Anti-Static Instrument

Zerostat Anti-Static Instrument

The Zerostat 3 is the ideal device for sample cleaning in electron microscope and histology labs and in photographic dark rooms. It easily releases dust from critical surfaces such as grid storage boxes, film, samples, plastics, etc. The Zerostat 3 functions by neutralizing static electricity. It prevents charged particles from "flying" during weighing or transfer, and keeps film, glass, and plasticware dust and lint-free. It is nonradioactive, and does not require an electrical power supply or batteries. Life expectancy is 50,000+ squeezes of the trigger. Each squeeze of the trigger generates a charge of approximately 1 Coulomb. Dimensions are 4.5" x 6.5".

Starting at: Call For Price

Glass Strips

Glass Strips

Glass Strips - Highest quality, 0.75" thick crystal glass. 10 strips per package. 1" x 16" - Yields 16 or more glass knives with base of 1" and height of 1" 1.5" x 9" - Yields 16 or more glass knives with base of 1.5" and height of 1.5" Other size glass strips available on request. Inquire about quantity discounts.

Starting at: $79.95

23160 - Plastic Tape

23160 - Plastic Tape

Plastic Tape - For making glass knife boat. Comes in a roll 1/2" wide by 36 yards long.
$25.95
Dental Wax

23165 - Dental Wax

Dental Wax - Used to seal tape boat to glass knife to prevent fluid leakage. Comes in sheets 2.5" x 4" x 1/16" thick. Package of 10 sheets.
$9.95
23185 - Glass Knife Boat Kit

23185 - Glass Knife Boat Kit

Glass Knife Boat Kit - Consists of: - 1 Roll Plastic Tape - 1 package Dental Wax - 1 Package Applicator Sticks - 10 Single Edge Razor Blades in Dispenser - Complete with instructions for best results
$40.95
70830 - Complete Glass Knife Kit

70830 - Complete Glass Knife Kit

Complete Glass Knife Kit - For making Ralph-Bennet glass knives. Comes complete with: - Glazier's Pliers - Glass Scorer - Rubber Pad - Applicator Sticks - Hard crystal glass and complete instruction sheet. Will make 30 knives.
$145.95
23195 - Eyelash with Handle

23195 - Eyelash with Handle

Eyelash with Handle - A selected pig's eyelash is attached to a length of hexagonal aluminum rod correctly proportioned for positioning microtomed sections floating in boat waiting to be picked up on a grid or with a loop. Eyelash may be cleaned repeatedly with alcohol. Has long life if handled with care.
$34.95
/

L03768 - BiPod Polisher Accessory - L Bracket

For holding sample securely in BiPod Polisher. Included at no charge with the purchase of the BiPod Polisher.
$102.00
/

L03145 - BiPod Polisher Accessory - Foot for BiPod Polisher

Priced at $21.00 individually. Included at no charge with the purchase of the BiPod Polisher.
$21.00
L59002 - Optional BiPod Polisher Accessory - Wedge Polisher Mount

L59002 - Optional BiPod Polisher Accessory - Wedge Polisher Mount

Designed specifically for wedge polishing of TEM specimens. the mount consists of a small aluminum clamping mechanism and 5 Pyrex rods which slide into the center of the clamp and are held in place when the L-bracket is tightened. Not included with the purchase of the BiPod Polisher.
$195.00
L650 - Low Speed Diamond Wheel Saw I - Model 650

L650 - Low Speed Diamond Wheel Saw I - Model 650

Low Speed Diamond Wheel Saw for 3" or 4" Wheels

The Model L650 Low Speed Diamond Wheel Saw is a compact, multipurpose, precision saw designed to cut a wide variety of materials with minimal subsurface damage. Its' low speed makes it possible to cut fragile materials that would otherwise fracture and soft materials that would load the diamond wheel on a higher speed saw. A variety of sample holders provides a means for mounting any shape sample while goniometer adaptability simplifies cutting oriented crystals.

Features:

- Belt drive system eliminates gear breakage which is common with less reliable fiber gear driven designs.
- Coolant reservoir is lowered and easily removed by opening an access door on the front panel.
- Both coarse and fine sample position adjustment.

Note!! Need help deciding which wheels will work for you? See the attachments below for answers to this and other questions you may have concerning our Wheel Saws.
$6,750.00
L65001 - Single Axis Goniometer for Low Speed Diamond Wheel Saw I

L65001 - Single Axis Goniometer for Low Speed Diamond Wheel Saw I

Has a graduated scale with a 0.2° vernier and can be rotated 360°. This rotational capability makes it ideal for precisely slicing single crystals.
$405.00
L65003 - Double Clamp Holder for Low Speed Diamond Wheel Saw I

L65003 - Double Clamp Holder for Low Speed Diamond Wheel Saw I

A clamp type holder designed to clamp both ends of a round or rectangular rod while cutting between the two clamped positions.
$255.00
L65004 - Petrographic Holder for Low Speed Diamond Wheel Saw I

L65004 - Petrographic Holder for Low Speed Diamond Wheel Saw I

Designed to use a vacuum to hold 2.5cm x 5.0cm glass plates, onto which petrographic or other samples are waxed, while making saw cuts parallel to the glass plate.
$715.00
L65005 - 2-Axis Goniometer for Low Speed Diamond Wheel Saw I

L65005 - 2-Axis Goniometer for Low Speed Diamond Wheel Saw I

A 2-axis goniometer used for orienting and cutting single crystals.
$1,445.00
L65006 - Vise for Low Speed Diamond Wheel Saw I

L65006 - Vise for Low Speed Diamond Wheel Saw I

Designed to hold flat, round and irregularly shaped samples without the need for a mounting wax.
$720.00
L65007 - Right Angle Holder for Low Speed Diamond Wheel Saw I

L65007 - Right Angle Holder for Low Speed Diamond Wheel Saw I

Designed to hold mounting blocks parallel to the saw blade.
$455.00
L65008 - Ball Joint Holder for Low Speed Diamond Wheel Saw I

L65008 - Ball Joint Holder for Low Speed Diamond Wheel Saw I

Designed to allow a wide range of motion to position the specimen for cutting.
$1,015.00
L65011 - Track Mount for Low Speed Diamond Wheel Saw I

L65011 - Track Mount for Low Speed Diamond Wheel Saw I

Designed to mount the 2-axis goniometer for the Low Speed Diamond Wheel Saw I onto a 1.99" or 2.19" wide x-ray or optical track for crystal orientation.
$1,445.00
L65012 - Dressing Stick Holder for Low Speed Diamond Wheel Saw I

L65012 - Dressing Stick Holder for Low Speed Diamond Wheel Saw I

To ensure efficient performance from a diamond wheel, it is imperative that the wheel is dressed on a regular basis to expose new diamonds for cutting.
$630.00
L65014 - Sample Rotation System for Low Speed Diamond Wheel Saw I

L65014 - Sample Rotation System for Low Speed Diamond Wheel Saw I

The RotaCutter is an optional specimen arm that mounts in place of the standard arm on the Low Speed Diamond Wheel Saw I and provides rotation of the sample during cutting.
$2,875.00

Items 31 to 60 of 154 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
per page

Grid List

Set Descending Direction

Electron Microscopy Supplies